filename:drivers/char/ipmi/ipmi_si.ko
depends:ipmi_msghandler
description:Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces.
author:Corey Minyard
license:GPL
alias:pci:v*d*sv*sd*bc0Csc07i*
alias:pci:v0000103Cd0000121Asv*sd*bc*sc*i*
parm:addrs:Sets the memory address of each interface, the addresses separated by commas. Only use if an interface is in memory. Otherwise, set it to zero or leave it blank. (array of ulong)
parm:force_kipmid:Force the kipmi daemon to be enabled (1) or disabled(0). Normally the IPMI driver auto-detects this, but the value may be overridden by this parm. (array of int)
parm:hotmod:Add and remove interfaces. See Documentation/IPMI.txt in the kernel sources for the gory details.
parm:irqs:Sets the interrupt of each interface, the addresses separated by commas. Only use if an interface has an interrupt. Otherwise, set it to zero or leave it blank. (array of int)
parm:ports:Sets the port address of each interface, the addresses separated by commas. Only use if an interface is a port. Otherwise, set it to zero or leave it blank. (array of uint)
parm:regshifts:The amount to shift the data read from the. IPMI register, in bits. For instance, if the data is read from a 32-bit word and the IPMI data is in bit 8-15, then the shift would be 8 (array of int)
parm:regsizes:The size of the specific IPMI register in bytes. This should generally be 1, 2, 4, or 8 for an 8-bit, 16-bit, 32-bit, or 64-bit register. Use this if you the 8-bit IPMI register has to be read from a larger register. (array of int)
parm:regspacings:The number of bytes between the start address and each successive register used by the interface. For instance, if the start address is 0xca2 and the spacing is 2, then the second address is at 0xca4. Defaults to 1. (array of int)
parm:slave_addrs:Set the default IPMB slave address for the controller. Normally this is 0x20, but can be overridden by this parm. This is an array indexed by interface number. (array of int)
parm:trydefaults:Setting this to 'false' will disable the default scan of the KCS and SMIC interface at the standard address (bool)
architectures:arm i386 powerpc x86_64
versions:v2.6.29 v2.6.30 v2.6.31 v2.6.32 v2.6.33 v2.6.34 v2.6.35 v2.6.36 v2.6.37 v2.6.38 v2.6.39 v3.0 v3.1 v3.2 v3.3 v3.4 v3.5